AZIMI-ROEEN, Ghasem - KASHANI-BOZORG, Seyed Farshid - NOSKO, Martin - ŠVEC, Peter. Reactive mechanism and mechanical properties of in-situ hybrid nano-composites fabricated from an Al-Fe2O3 system by friction stir processing. In Materials Characterization, 2017, vol. 127, p. 279-287. (2.714 - IF2016). (2017 - Current Contents). ISSN 1044-5803.
KHODABAKHSHI, F. - SIMCHI, A. - KOKABI, A.H. - GERLICH, A.P. - NOSKO, Martin - ŠVEC, Peter. Influence of hard inclusions on microstructural characteristics and textural components during dissimilar friction-stir welding of an PM Al–Al2O3–SiC hybrid nanocomposite with AA1050 alloy. In Science and Technology of Welding and Joining, 2017, vol. 22, iss. 5, p. 412-427. (2.050 - IF2016). (2017 - Current Contents). ISSN 1362-1718.
KOVÁČIK, Jaroslav - EMMER, Š. - RODRÍGUEZ, J. - CANADAS, I. Sintering of HDH Ti powder in a solar furnace at Plataforma Solar de Almeria. In Journal of Alloys and Compounds, 2017, vol. 695, p. 52-59. (3.133 - IF2016). (2017 - Current Contents). ISSN 0925-8388.
KOVÁČOVÁ, Andrea - KVAČKAJ, Tibor - KOČIŠKO, Róbert - DRAGOŠEK, Lukáš - LITYŃSKA-DOBRZYŃSKA, Lidia. The Effect of Severe Plastic Deformation and Heat Treatment on CuCrZr Alloys. In Acta Physica Polonica A, 2017, vol. 131, iss. 5, p. 1336-1339. (0.469 - IF2016). (2017 - Current Contents). ISSN 1898-794X.
KOVÁČ, Pavol - HUŠEK, Imrich - MELIŠEK, Tibor - KULICH, Miloslav - ROSOVÁ, Alica - KOVÁČ, Ján - KOPERA, Ľubomír - BALOG, Miroslav - KRÍŽIK, Peter - OROVČÍK, Ľubomír. Lightweight Al-stabilized MgB2 conductor made by the IMD process. In Superconductor Science and Technology, 2017, vol. 30, 115001. (2.878 - IF2016). (2017 - Current Contents). ISSN 0953-2048.
KOVÁČ, Pavol - BALOG, Miroslav - HUŠEK, Imrich - KOPERA, Ľubomír - KRÍŽIK, Peter - ROSOVÁ, Alica - KOVÁČ, Ján - KULICH, Miloslav - ČAPLOVIČOVÁ, M. Properties of near- and sub-micrometre Al matrix composites strengthened with nano-scale in-situ Al2O3 aimed for low temperature applications. In Cryogenics, 2017, vol. 87, p. 58–65. (1.465 - IF2016). (2017 - Current Contents). ISSN 0011-2275.
KUBÁSEK, Jiří - DVORSKÝ, Drahomír - ČAVOJSKÝ, Miroslav - VOJTĚCH, Dalibor - BERONSKÁ, Naďa - FOUSOVÁ, Michaela. Superior Properties of Mg-4Y-3RE-Zr Alloy Prepared by Powder Metallurgy. In Journal of Materials Science and Technology, 2017, vol. 33, p. 652-660. (2.764 - IF2016). (2017 - Current Contents). ISSN 1005-0302.
LAPIN, Juraj - KLIMOVÁ, Alena - GABALCOVÁ, Zuzana - PELACHOVÁ, Tatiana - BAJANA, Otto - ŠTAMBORSKÁ, Michaela. Microstructure and mechanical properties of cast in-situ TiAl matrix composites reinforced with (Ti,Nb)(2)AlC particles. In Materials and Design, 2017, vol. 133, p. 404-415. (4.364 - IF2016). (2017 - Current Contents). ISSN 0261-3069.
LINUL, E. - SERBAN, D. A. - MARSAVINA, L. - KOVÁČIK, Jaroslav. Low-cycle fatigue behaviour of ductile closed-cell aluminium alloy foams. In Fatigue&Fracture of Engineering Materials&Structures, 2017, vol. 40, iss. 4, p. 597-604. (2.335 - IF2016). (2017 - Current Contents). ISSN 8756-758X.
LINUL, Emanoil - MARSAVINA, Liviu - KOVÁČIK, Jaroslav. Collapse mechanisms of metal foam matrix composites under static and dynamic loading conditions. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2017, vol. 690, p. 214-224. (3.094 - IF2016). (2017 - Current Contents). ISSN 0921-5093.
MIKULA, Marian - TRUCHLÝ, Martin - SANGIOVANNI, Davide G. - PLAŠIENKA, Dušan - ROCH, Tomáš - GREGOR, Maroš - ĎURINA, Pavol - JANÍK, Marián - KÚŠ, Peter. Experimental and computational studies on toughness enhancement in Ti-Al-Ta-N quaternaries. In Journal of Vacuum Science and Technology A, 2017, vol. 35, no. 6, p. 060602-1-060602-6. (1.374 - IF2016). (2017 - Current Contents). ISSN 0734-2101.
MIKULA, Marian - SANGIOVANNI, D. G. - PLAŠIENKA, D. - ROCH, T. - ČAPLOVIČOVÁ, M. - TRUCHLÝ, M. - SATRAPINSKYY, L. - BYSTRICKÝ, Roman - TONHAUZEROVÁ, D. - VLČKOVÁ, D. - KÚŠ, P. Thermally induced age hardening in tough Ta-Al-N coatings via spinodal decomposition. In Journal of Applied Physics, 2017, vol. 121, iss. 15, s. 155304-1 - 155304-7. (2.068 - IF2016). (2017 - Current Contents). ISSN 0021-8979.
MÚČKA, Peter International Roughness Index specifications around the world. In Road Materials and Pavement Design, 2017, vol. 18, no. 4, p. 929-965. (1.401 - IF2016). (2017 - Current Contents). ISSN 1468-0629.(Vega č. 2/0089/16: Výskum vzťahu pozdĺžnej nerovnosti vozovky a jazdného komfortu v motorovom vozidle).
MÚČKA, Peter Road Roughness Limit Values Based on Measured Vehicle Vibration. In Journal of Infrastructure Systems, 2017, vol. 23, iss. 2, s. 04016029-1 - 04016029-13. (1.516 - IF2016). (2017 - Current Contents). ISSN 1076-0342.
SENNA, M. - BILLIK, Peter - YERMAKOV, A.Ye. - ŠKRÁTEK, Martin - MAJEROVÁ, Melinda - ČAPLOVIČOVÁ, M. - MIČUŠÍK, Matej - ČAPLOVIČ, L. - BUJDOŠ, M. - NOSKO, Martin. Synthesis and magnetic properties of CuAlO2 from high-energy ball-milled Cu2O–Al2O3 mixture. In Journal of Alloys and Compounds, 2017, vol. 695, p. 2314-2323. (3.133 - IF2016). (2017 - Current Contents). ISSN 0925-8388.
ŠTAFURA, Andrej - NAGY, Štefan - BUČKOVÁ, Mária - PUŠKÁROVÁ, Andrea - KRAKOVÁ, Lucia - ČULÍK, M. - BERONSKÁ, Naďa - NAGY, Štefan - PANGALLO, Domenico. The influence of microfilamentous fungi on wooden organ pipes: One year investigation. In International Biodeterioration & Biodegradation, 2017, vol. 121, p. 139–147. (2.962 - IF2016). (2017 - Current Contents). ISSN 0964-8305.
YAKYMOVYCH, A. - PLEVACHUK, Yu. - ŠVEC, Peter - JANIČKOVIČ, Dušan - ŠEBO, Pavol - BERONSKÁ, Naďa - NOSKO, Martin - OROVČÍK, Ľubomír - ROSHANGHIAS, A. - IPSER, H. Nanocomposite SAC solders: morphology, electrical and mechanical properties of Sn–3.8Ag–0.7Cu solders by adding Co nanoparticles. In Journal of Materials Science. Materials in Electronics, 2017, vol. 28, iss. 15, p. 10965-10973. (2.019 - IF2016). (2017 - Current Contents). ISSN 0957-4522.
YANG, Hanry - JIANG, Lin - BALOG, Martin - KRÍŽIK, Peter - SCHOENUNG, Julie M. Reinforcement Size Dependence of Load Bearing Capacity in Ultrafine-Grained Metal Matrix Composites. In Metallurgical and materials transactions A: physical metallurgy and materials science, 2017, vol. 48A, iss. 9, p. 4385-4392. (1.874 - IF2016). (2017 - Current Contents). ISSN 1073-5623.
ZOLEK, N. - RANACHOWSKI, Z. - RANACHOWSKI, P. - JOZWIAK-NIEDZWIEDZKA, D. - KÚDELA, Stanislav, Jr. - DVORÁK, Tomáš. STATISTICAL ASSESSMENT OF THE MICROSTRUCTURE OF BARITE AGGREGATE FROM DIFFERENT DEPOSITS USING X-RAY MICROTOMOGRAPHY AND OPTICAL MICROSCOPY. In Archives of Metallurgy and Materials, 2017, vol. 62, iss. 2, p. 697-702. (0.571 - IF2016). (2017 - Current Contents). ISSN 1733-3490.
ČAVOJSKÝ, Miroslav - KRÍŽIK, Peter - ŠVANTNER, Tomáš - ŠTĚPÁNEK, Matěj - BALOG, Martin. Die wear during hot extrusion of ex-situ and in-situ aluminum composites. In Kovové materiály, 2017, vol. 55, iss. 3, p. 223-227. (0.366 - IF2016). (2017 - Current Contents). ISSN 0023-432X.
EMMER, Štefan - GÁBRIŠOVÁ, Z. - KOVÁČIK, Jaroslav - SEJČ, P. - LIS, M. - KULASA, J. Microstructure changes of the tungsten insert in CuCrZr compound electrode during resistance spot welding of galvanized sheets. In Kovové materiály, 2017, vol. 55, iss. 6, p. 385-393. (0.366 - IF2016). (2017 - Current Contents). ISSN 0023-432X.
KÚDELA, Stanislav, Jr. - ŠVEC, Peter - BAJANA, Otto - OROVČÍK, Ľubomír - RANACHOWSKI, P. - RANACHOWSKI, Z. Saffil alumina fibers reinforced dual-phase Mg-Li and Mg-Li-Zn alloys. In Kovové materiály, 2017, vol. 55, iss. 3, p. 195-203. (0.366 - IF2016). (2017 - Current Contents). ISSN 0023-432X.
OROVČÍK, Ľubomír - NOSKO, Martin - KOVÁČIK, Jaroslav - DVORÁK, Tomáš - ŠTĚPÁNEK, Matěj - SIMANČÍK, František. Effect of chemical composition on the pore structure and heat treatment on the deformation of PM aluminium foam 6061 and 7075. In Kovové materiály, 2016, roč. 54, č. 6, s. 463-470. (0.365 - IF2015). (2016 - Current Contents). ISSN 0023-432X.
ŠTAMBORSKÁ, Michaela - LAPIN, Juraj. Effect of anisotropic microstructure on high-temperature compression deformation of CoCrFeNi based complex concentrated alloy. In Kovové materiály, 2017, vol. 55, iss. 6, p. 369-378. (0.366 - IF2016). (2017 - Current Contents). ISSN 0023-432X.
LINUL, Emanoil - MARSAVINA, Liviu - KOVÁČIK, Jaroslav - SADOWSKI, Tomasz. Dynamic and quasi-static compression tests of closed-cell aluminium alloy foams. In Proceedings of the Romanian Academy.Seria A. Mathematics, 2017, vol. 18, iss. 4, p. 361-369. (1.623 - IF2016). ISSN 1454-9069.
BALOG, Martin - SNAJDAR, Mateja - KRÍŽIK, Peter - SCHAUPERL, Zdravko - STANEC, Zlatko - CATIC, Amir. Titanium-Magnesium Composite for Dental Implants (BIACOM). In TMS 2017: 146th Annual Meeting and Exhibition Supplemental Proceedings. Part VI.Advanced Materials in Dental and Orthopedic Applications. - Springer International Publishing AG, p. 271-284. ISBN 978-3-319-51493-2. ISSN 2367-1696.
BERONSKÁ, Naďa - ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan - OPÁLEK, Andrej - KOLLAROVIČOVÁ, Andrea - NAGY, Štefan - IŽDINSKÝ, Karol. Microstructure and Erosion Resistance of Zirconium Diboride Ceramics Infiltrated by Pure Copper. Ed. Margita Longauerová, Peter Horňak, Pavol Zubko. In Materials Science Forum. - Zürich: Trans. Tech. Publications, 2017, vol. 891, p. 458-461. ISSN 0255-5476.(Metallography´16: international symposium on metallography and materilas science).
DVORSKÝ, D - KUBÁSEK, J - VOJTĚCH, D. - VOŇAVKOVÁ, I. - VESELÝ, M. - ČAVOJSKÝ, Miroslav. Structure and mechanical characterization of Mg-Nd-Zn alloys prepared by different processes. In IOP Conference Series: Materials Science and Engineering, 2017, vol. 179, 012018, p. 1-6. ISSN 1757-899x.
GLOGOVSKÝ, Miroslav - FUJDA, Martin - BALOG, Martin - ŠTĚPÁNEK, Matěj. Microstructure and mechanical properties of milled carbon fibers reinforced EN AW 6082 aluminium matrix composites after hot extrusion. In Manufacturing Technology, 2017, vol. 17, no. 5, p. 706-710. ISSN 1213-2489.
JERZ, Jaroslav - SIMANČÍK, František - KOVÁČIK, Jaroslav - ŠPANIELKA, Ján. Aluminium foam for thermo-active pitched roofs of nearly zero-energy buildings. In Mechanical Technologies and Structural Materials 2017: 7th International Conference. - Split: Croatian Society for Mechanical Technologies, 2017, p. 49-58. ISSN 1847-7917.
JERZ, Jaroslav - TOBOLKA, Peter - NOSKO, Martin - DVORÁK, Tomáš. Applications of Nanocomposite-Enhanced Phase-Change Materials for Heat Storage. In Materials Science Forum. - Zürich: Trans. Tech. Publications, 2017, vol. 891, p. 509-515. ISSN 0255-5476. (Metallography´16: international symposium on metallography and materilas science).
KOLEŇÁK, Roman - KOSTOLNÝ, Igor - ŠEBO, Pavol. Wettability of selected lead-free solders for higher application temperatures. In Key Engineering Materials, 2016, vol. 705, p. 190-195. ISSN 1013-9826.
KOVÁČIK, Jaroslav - MINÁRIKOVÁ, Natália - ŠUGÁR, P. - ŠUGÁROVÁ, Jana - FRNČÍK, Martin - EMMER, Štefan - RODRIGUEZ, José - CANADAS, Inmaculada - KULASA, Joanna - MALARA, Szymon - LIS, Marcin. Gas Nitriding of Titanium in Solar Furnance. In Mechanical Technologies and Structural Materials 2017: 7th International Conference. - Split: Croatian Society for Mechanical Technologies, 2017, p. 65-70. ISSN 1847-7917.
KRÍŽIK, Peter - BALOG, Martin - BAJANA, Otto - RIGLOS, Maria Victoria Castro - ŠVEC, Peter. Warm Pressing of Al Powders: An Alternative Consolidation Approach. In Light Metals 2017. Part X. - Springer International Publishing, 2017, p. 463-469. ISBN 978-3-319-51541-0.
KOLLAROVIČOVÁ, Andrea - BERONSKÁ, Naďa - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol. Al-Limestone and Al-Granite Composites Prepared by Cold Spraying. Ed. Margita Longauerová, Peter Horňak, Pavol Zubko. In Materials Science Forum. - Zürich: Trans. Tech. Publications, 2017, vol. 891, p. 537-541. ISSN 0255-5476.(Metallography´16: international symposium on metallography and materilas science).
NAGY, Štefan - ŠTEFÁNIK, Pavol - VÁVRA, Ivo - NOSKO, Martin - OROVČÍK, Ľubomír - OPÁLEK, Andrej - IŽDINSKÝ, Karol - KÚDELA, Stanislav, Jr. - SIMANČÍK, František. Methodics of sample preparation of Mg/Carbon fiber composite for TEM and characterization of the interface. In Mechanical Technologies and Structural Materials 2017: 7th International Conference. - Split: Croatian Society for Mechanical Technologies, 2017, p. 83-87. ISSN 1847-7917.
OPÁLEK, Andrej - ŠTEFÁNIK, Pavol - BERONSKÁ, Naďa - KLIMOVÁ, Alena - KÚDELA, Stanislav, Jr. - IŽDINSKÝ, Karol - NAGY, Štefan. Ni-NiO Porous Preform with Controlled Porosity Using Al2O3 Powder. Ed. Margita Longauerová, Peter Horňak, Pavol Zubko. In Materials Science Forum. - Zürich: Trans. Tech. Publications, 2017, vol. 891, p. 533-536. ISSN 0255-5476.
OROVČÍK, Ľubomír - NOSKO, Martin - ROSOVÁ, Alica. EBSD of aluminium powder compacts - preparation method for observation in dependence on powder size. In Mechanical Technologies and Structural Materials 2017: 7th International Conference. - Split: Croatian Society for Mechanical Technologies, 2017, p. 99-102. ISSN 1847-7917.
KOVÁČIK, Jaroslav - JERZ, Jaroslav - SIMANČÍK, František - MINÁRIKOVÁ, Natália. Coloring of Pure Zinc Foams. In Metallic foams, 2017, vol. 1, no. 1, p. 54-59. ISSN 2515-1282.
KOVÁČIK, Jaroslav - ŠPANIELKA, Ján - DVORÁK, Tomáš - OSLANEC, Peter, Jr. - JERZ, Jaroslav. Closed Cell Aluminium Foams with Phase Change Material. In Metallic foams, 2017, vol. 1, no. 1, p. 42-48. ISSN 2515-1282.
NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman - TOBOLKA, Peter - JERZ, Jaroslav - MINÁRIKOVÁ, Natália - KOVÁČIK, Jaroslav. Sound Absorption Ability of Aluminium Foams. In Metallic foams, 2017, vol. 1, no. 1, p. 15-41. ISSN 2515-1282.
PAWELEK, Andrzej - OZGOWICZ, Wojciech - RANACHOWSKI, Zbigniew - KÚDELA, Stanislav - PIATKOWSKI, Andrzej - KÚDELA, Stanislav, Jr. - RANACHOWSKI, Przemyslaw. Behaviour of Acoustic Emission in Deformation and Microcracking Processes of Mg Alloys Matrix Composites Subjected to Compression Tests. In Archives of Current Research International, 2017, vol. 8, iss. 2, p. 1-13. ISSN 2454-7077.
RANACHOWSKI, Zbigniew - SCHABOWICZ, Krzysztof - GORZELAŃCZYK, Tomasz - KÚDELA, Stanislav, Jr. - DVORÁK, Tomáš. Visualization of fibers and voids inside industrial fiber concrete boards. In Material Science & Engineering International Journal: open access journal, 2017, vol. 1, iss. 4, art. no.00022. ISSN 2574-9927.
STANEC, Z. - HALAMBEK, J. - MALDINI, K. - BALOG, Martin - KRÍŽIK, Peter - SCHAUPERL, Z. - CATIĆ, A. The effect of magnesium on the development of biologically inspired titanium-based surface produced by powder metallurgy technique. In Clinical Oral Implants Research, vol. 27, iss. S13, p. 8. ISSN 0905-7161.
ŤAVODOVÁ, Miroslava - KALINCOVÁ, Daniela - ŠVANTNER, Tomáš. HEAT TREATMENT - THE TOOL FOR INCREASING WEAR RESISTANCE OF MATERIAL. In 26. dny tepelného zpracování s mezinárodní účastí. - Čerčany: Asociace pro tepelné zpracování kovů: ECOSOND s.r.o., 2017. ISBN 978-80-907043-0-5.
OSLANEC, Peter, Jr. - ŠKROBIAN, Milan. Pecularities of Gas Analysis in Al and Mg Powders. In Powder Metallurgy Progress: Journal of Science and Technology of Particle Materials, 2017, vol. 17, no. 1, p. 065-071. ISSN 1335-8978. (Deformation and fracture in PM materials DFPM 2017: International conference).
STEIN, George Juraj - TOBOLKA, Peter - CHMÚRNY, Rudolf. Preliminary investigations of a vibration damper with a permanent magnet and a coil. In Noise and Vibration in Practice: Peer-reviewed Scientific Proceedings. Vol. 22. Editor: S. Žiaran; Reviewers: Ľ. Argalášová, M. Balážiková, P. Beneš et al. - Bratislava, Slovak Republic: Slovak University of Technology, 2017, 2017, vol. 22, p. 87-92. ISBN 978-80-227-4696-0.(XXII. MEDZINÁRODNÁ AKUSTICKÁ KONFERENCIA).
SIMANČÍK, František - BALOG, Martin - KRÍŽIK, Peter - OSLANEC, Peter, Jr. - ŠPANIELKA, Ján - ČAVOJSKÝ, Miroslav - ŠKROBIAN, Milan. Mg powder - promising material for multifunctional use. In Deformation and fracture in PM materials DFPM 2017: International conference. Book of abstracts. Stará Lesná, 22.-25.10.2017. Ed. Beáta Ballóková, Katarína Ondrejová. - Košice: Institute of Materials Research SAS, 2017, p. 16. ISBN 978-80-89782-07-9.
ŠIŠKOVÁ, Alena - CSOMOROVÁ, Katarína - KLEINOVÁ, Angela - OPÁLEK, Andrej - ECKSTEIN ANDICSOVÁ, Anita. Controlled releases system for agrochemicals on the base of functionalized cellulose. In Frontiers in Polymer Science: fifth international symposium: in assotiation with the journal polymer: abstracts. - Seville, Spain: Elsevier, 2017, non p.,
ŠIŠKOVÁ, Alena - KOZMA, Erika - GALEOTTI, Francesco - OPÁLEK, Andrej - RYDZ, Joanna - ECKSTEIN ANDICSOVÁ, Anita. Natural polymers for innovative applications. In Brochure of the International Workshop on Polymer Science and Polymeric Materials. - Bratislava, Budapest, Zabrze: Centre of Polymer and Carbon Materials Polish Academy of Sciences, Research Centre for Natural Sciences Hungarian Academy of Sciences, Polymer Institute of the Slovak Academy of Sciences, 2017, p. 16. ISBN 978-80-89841-06-6.
BALOG, Martin - KRÍŽIK, Peter - OROVČÍK, Ľubomír - HASSAN IBRAHIM, Ahmed Mohamed - CATIC, Amir - SCHAUPERL, Zdravko. Microstructural characterisation and testing of bioactive titanium-magnesium metal composite for dental implants (BIACOM®). In Deformation and fracture in PM materials DFPM 2017: International conference. Book of abstracts. Stará Lesná, 22.-25.10.2017. - Košice: Institute of Materials Research SAS, 2017, p. 76. ISBN 978-80-89782-07-9.
ECKSTEIN ANDICSOVÁ, Anita - KRONEKOVÁ, Zuzana - KLEINOVÁ, Angela - OPÁLEK, Andrej - ŠIŠKOVÁ, Alena. Silk-based biomaterials for medical application. In Applied natural sciences 2017: conference proceedings of the 6th Biennial international scientific conference. - Trnava: University of SS. Cyril and Methodius in Trnava, 2017, p. 20. ISBN 978-80-8105-547-8.
KONTRÍK, Martin - ŠIMKO, František - JANIČKOVIČ, Dušan - NOSKO, Martin - KORENKO, Michal - BOČA, Miroslav. Corrosion resistance of inert anode material with different crystal structure in molten low-temperature fluoride salt. In Preparation of ceramic materials: Proceedings of the 12th international conference. Jahodná, 13.-15.6.2017. - Košice: Technical University, 2017, p. 164-165. ISBN 978-80-553-3160-7.
KUBÁSEK, Jiří - DVORSKÝ, Drahomír - VOJTĚCH, Dalibor - ČAVOJSKÝ, Miroslav. WE43 Magnesium Based Alloy Prepared By PM Methods. In Deformation and fracture in PM materials DFPM 2017: International conference. Book of abstracts. Stará Lesná, 22.-25.10.2017. - Košice: Institute of Materials Research SAS, 2017, p. 70. ISBN 978-80-89782-07-9.
NOSKO, Martin - OROVČÍK, Ľubomír - BALOG, Martin - KRÍŽIK, Peter - NAGY, Štefan - SIMANČÍK, František - ZIFČÁK, Peter. Effect of Al powder size on the microstructure and properties of friction stirr welded joints. In Deformation and fracture in PM materials DFPM 2017: International conference. Book of abstracts. Stará Lesná, 22.-25.10.2017. - Košice: Institute of Materials Research SAS, 2017, p. 40. ISBN 978-80-89782-07-9.
ŠTĚPÁNEK, Matěj - BALOG, Martin - NAGY, Štefan - SIMANČÍK, František. Microstructural and surface changes of magnesium alloyed aluminium powders on heating. In Deformation and fracture in PM materials DFPM 2017: International conference. Book of abstracts. Stará Lesná, 22.-25.10.2017. - Košice: Institute of Materials Research SAS, 2017, p. 86. ISBN 978-80-89782-07-9.
LACO, Juraj - BARTA, Andrej - MATÚŠKOVÁ, Zuzana - CEBOVÁ, Martina - REHÁKOVÁ, Radoslava - MURÍNOVÁ, Jana - RIEČANSKÝ, Igor - ČAVOJSKÝ, Miroslav - SIMANČÍK, František - PECHÁŇOVÁ, Oľga. Vplyv Mg a jeho zliatiny WE43 na aktivitu NO-syntázy v obličkách potkanov. In Srdce, mozog, cievy: od normálnej k patologickej fyziológii: zborník abstraktov, Smolenice, 4.-6. apríl 2017. - Bratislava: Ústav normálnej a patologickej fyziológie SAV, 2017, s. 44. ISBN 978-80-971699-7-8.
ROGANTE, Massimo - JERZ, Jaroslav. SCHIUME D´ALLUMINIO: CARATTERISTICHE E PRINCIPALI IMPIEGHI. In IL PROGETTISTA INDUSTRIALE, 2017, vol. 37, no. 08, p. 56-61. ISSN 0392-4823.