KOVÁČIK, Jaroslav - EMMER, Štefan - BIELEK, Jozef - KELEŠI, Jozef. Effect of composition on friction coefficient of Cu-graphite composites. In Wear : An international journal on the science and technology of friction, lubrication and wear, 2008, vol. 265, no.3-4, p.417-421. ISSN 0043-1648.
KOVÁČIK, Jaroslav. Correlation Between Elastic Modulus, Shear modulus, Poisson's Ratio and Porosity in Porous Materials. In Advanced Engineering Materials, 2008, vol.10, no.3, p.250-252. ISSN 1438-1656.
KROPÁČ, Oldřich - MÚČKA, Peter. Indicators of longitudinal unevenness of roads in the USA. In International Journal of Vehicle Design, 2008, vol. 46, no.4, p.393-415. ISSN 0143-3369.
KROPÁČ, Oldřich - MÚČKA, Peter. Deterioration Model of Longitudinal Road Unevenness Based on its Power Spectral Density Indices. In Road Materials and Pavement Design, 2008, vol. 9, no. 3, p.389-420. ISSN 1468-0629.
KROPÁČ, Oldřich - MÚČKA, Peter. Effect of obstacles in the road profile on the dynamic response of a vehicle. In Proceedings of the Institution of Mechanical Engineers Part D : Journal of Automobile Engineering, 2008, vol. 222, p.353-370.
KROPÁČ, Oldřich - MÚČKA, Peter. Effect of obstacles on roads with different waviness values on the vehicle response. In Vehicle System Dynamics, 2008, vol. 46, no.3. (0.367 - IF2007). (2008 - Current Contents). ISSN 0042-3114.
MIKULA, Marian - GRANČIČ, B. - BURŠÍKOVÁ, Vilma - CSUBA, Adrian - DRŽÍK, Milan - KAVECKÝ, Štefan - PLECENIK, Andrej - KÚŠ, P. Mechanical properties of superhard TiB2 coatings prepared by DC magnetron sputtering. In Vacuum, 2008, vol. 82, p. 278-281. (2008 - Current Contents). ISSN 0042-207X.
POLETTI, C. - BALOG, Martin - SCHUBERT, T. - LIEDTKE, V. - EDTMAIER, C. Production of titanium matrix composites reinforced with SiC particles. In Composites Science and Technology, 2008, vol. 68, no.9, p.2171-2177. (2.171 - IF2007). (2008 - Current Contents). ISSN 0266-3538.
STEIN, George Juraj - MÚČKA, Peter - GUNSTON, T.P. - BADURA, S. Modelling and simulation of locomotive driver's seat vertical suspension vibration isolation system. In International Journal of Industrial Ergonomics, 2008, vol. 38, nos.5-6, p.384-395. (2008 - Current Contents). ISSN 0169-8141.
ŠEBO, Pavol - ŠVEC, Peter - JANIČKOVIČ, Dušan - ŠTEFÁNIK, Pavol. Influence of thermal cycling on shear strenght of Cu-Sn3.5AgIn-Cu joints with various content of indium. In Journal of Alloys and Compounds, 2008, vol. 463, p. 168-172. (1.455 - IF2007). (2008 - Current Contents, WOS, SCOPUS). ISSN 0925-8388.
PECOVÁ, R. - JAVORKOVÁ, N. - KUDLIČKA, Ján - TATÁR, M. Tussigenic agents in the measurement of cough reflex sensitivity. In Journal of Physiology and Pharmacology : formerly Acta Physiologica Polonica, 2007, vol.58, no.Suppl.5, p.531-538. (2.974 - IF2006). (2007 - Current Contents). ISSN 0867-5910.
KÚDELA, Stanislav, Jr. - OSWALD, S. - KÚDELA, Stanislav - WETZIG, K. Application of FTIR spectra for evaluating interfacial reactions in metal matrix composites. In Analytical and Bioanalytical Chemistry, 2008, vol. 390, no.6, p.1477-1486. ISSN 1618-2642.
STEIN, George Juraj - ZAHORANSKÝ, Radúz - GUNSTON, T.P. - BURSTRÖM, L. - MEYER, L. Modelling and simulation of a fore-and-aft driver's seat suspension system with road excitation. In International Journal of Industrial Ergonomics, 2008, vol. 38, nos.5-6, p.396--409. (2008 - Current Contents). ISSN 0169-8141.
STEIN, George Juraj - ZAHORANSKÝ, Radúz - MÚČKA, Peter. On dry friction modelling and simulation in kinematically excited oscillatory systems. In Journal of Sound and Vibration, 2008, vol. 311, p.74-96. (1.024 - IF2007). (2008 - Current Contents). ISSN 0022-460 X.
LAPIN, Juraj - GABALCOVÁ, Zuzana. The effect of oxygen content and cooling rate on phase transformations in directionally solidified intermetallic Ti-46Al-8Nb alloy. In Kovové materiály, 2008, vol. 46, no. 4, p.185-195. (1.345 - IF2007). (2008 - Current Contents, SCOPUS). ISSN 0023-432X.
LAPIN, Juraj - GEBURA, Marek - PELACHOVÁ, Tatiana - NAZMY, M. Coarsening kinetics of cuboidal gamma precipitates in single crystal nickel base superalloy CMSX-4. In Kovové materiály, 2008, roč. 46, p.313-322. (1.345 - IF2007). (2008 - Current Contents, SCOPUS). ISSN 0023-432X.
ŠEBO, Pavol - ŠVEC, Peter - JANIČKOVIČ, Dušan - MOSER, Z. Identification of phases in Sn-Ag-Cu-In solder on Cu substrate interface : letter to the editor. In Kovové materiály, 2008, vol. 46, no. 4, p. 235-238. (1.345 - IF2007). (2008 - Current Contents, SCOPUS). ISSN 0023-432X.
BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - HVIZDOŠ, Pavol - KOHÚTEK, Ivan. Influence of volume fraction on fracture mechanism of Al-Al4C3 system studied by "in-situ tensile test in SEM". In Kovové materiály, 2008, vol. 46, p.139-143. (1.345 - IF2007). (2008 - Current Contents, SCOPUS). ISSN 0023-432X.
ZOLLINGER, J. - GABALCOVÁ, Zuzana - DALOZ, D. - LAPIN, Juraj - COMBEAU, H. Microsegregation induced microstructures in intermetallic Ti-46Al-8Nb alloy. In Kovové materiály, 2008, vol. 46, no. 5, pp. 291-296. (1.345 - IF2007). (2008 - Current Contents, SCOPUS). ISSN 0023-432X.
KUŚNIERZ, J. - PAWEŁEK, A. - RANACHOWSKI, Z. - PIĄTKOWSKI, A. - JASIEŃSKI, Z. - KÚDELA, Stanislav - KÚDELA, Stanislav, Jr.. Mechanical and acoustic emission behaviour induced by channel-die compression of Mg-Li nanocrystalline alloys obtained by ECAP technique. In Reviews on Advanced Materials Science, 2008, vol. 18, p. 583-589. (1.122 - IF2007). (2008 - WOS, SCOPUS). ISSN 1606-5131.
BALOG, Martin - NAGY, Juraj - SIMANČÍK, František - IŽDINSKÝ, Karol - REQUENA, Guillermo. Heat resistant ultra-fine grained Al profiles. In Reviews on Advanced Materials Science, 2008, vol. 18, no. 7, p. 415-421. (1.122 - IF2007). (2008 - WOS, SCOPUS). ISSN 1606-5131.
NAGY, Juraj - BALOG, Martin - SIMANČÍK, František - IŽDINSKÝ, Karol - JANIČKOVIČ, Dušan - ŠVEC, Peter. Consolidation of rapidly solidified Al-based particles using equal channel angular pressing (ECAP). In Reviews on Advanced Materials Science, 2008, vol. 18, no. 7, p. 608-615. (1.122 - IF2007). (2008 - WOS, SCOPUS). ISSN 1606-5131.
VOJTĚCH, Dalibor - MICHALCOVÁ, Alena - VERNER, Jan - ŠERÁK, Jan - SIMANČÍK, František - BALOG, Martin - NAGY, Juraj. Structure and properties of PM nano-crystalline Al-Cr based alloys. In Materials Science Forum, 2008, vol. 567-568, p.197-200. ISSN 0255-5476.
STEIN, George Juraj - ZAHORANSKÝ, Radúz. Accounting for dry friction influence in oscillatory systems exposed to random excitation. In Mechanics, 2007, vol. 26, no.2. ISSN 1734-8927.
ADAMČÍKOVÁ, Andrea - KOVÁČIK, Jaroslav. Effect of powder size and foaming agent on aluminium foam expansion. In Material Science and Technology, 2008, č.4. ISSN 1335-9053.
GEBURA, Marek - LAPIN, Juraj. Spontaneous rafting in single crystal Ni-base superalloy during long-term ageing. In Material Science and Technology, 2008, č.4, s.32-38. ISSN 1335-9053.
OSLANEC, Peter - IŽDINSKÝ, Karol - SIMANČÍK, František. Possibilities of magnesium recycling. In Material Science and Technology, 2008, č.4, s.83-88. ISSN 1335-9053.
STEIN, George Juraj - CHMÚRNY, Rudolf - ROSÍK, Vladimír. Measurement and Analysis of Low Frequency Vibration. In Measurement Science Review : journal published by Institute of Measurement Science, Slovak Academy of Sciences, 2007, vol. 7, p.47-50. (2007 - Copernicus International). ISSN 1335-8871.
BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - KVAČKAJ, Tibor. The Mechanical properties and fracture mechanism of Al-Al4C3 system investigated by "in-situ tensile test in sem" method. In Acta Metallurgica Slovaca, 2008, roč. 14, č. 1, s. 7-16. ISSN 1338-1156.
JERZ, Jaroslav - KOŠÚT, Ján. Slovak network for R&D and education in the field of modern engineering materials (MATNET-SLOVAKIA). In INTED 2008. Editor L. Chova Gómez, D. Belenguer Martí, I. Torres Candel. - Valencia : IATED, 2008. ISBN 978-84-612-0190-7.
JERZ, Jaroslav - SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin. Advanced techniques for utilisation of aluminium foams. In MATRIB 2008 : international conference. Editor Krešimir Grilec, Gojko Marić, Suzana Jakovljević. - Zagreb : CSMT, 2008. ISBN 978-953-7040-13-00.
ADAMČÍKOVÁ, Andrea - TARABA, Bohumil. Numerical and experimental analysis of cooling part in quenching oil ISOMAX 166 = Numerická a experimentálna analýza ochladzovania súčiastky v kaliacom oleji ISOMAX 166. In Experimental Stress Analysis 2008 : international scientific conference. Editor Jan Hrabec, Martin Fusek, Radim Halama.
WISZT, Erich - WISZTOVÁ, Elena. Determination of quadratic performance indices - a general algebraic approach. In Interakce a zpětné vazby 2008. Editor I. Zolotarev. - Prague : Institute of Thermomechanics AS CR, 2008, s.133-140. ISBN 978-80-87012-15-4.
STEIN, George Juraj - ZAHORANSKÝ, Radúz - CHMÚRNY, Rudolf - MÚČKA, Peter. Appropriateness of simple friction force models for simulation of oscillatory systems exposed to stationary random excitation. In EURODYN 2008 : european conference on structural dynamics. Editor Michael J. Brennan. - Southampton : Institute of Sound and Vibration Research, 2008. ISBN 9780854328826.
JERZ, Jaroslav - KOŠÚT, Ján. The importance of effective knowledge transfer of modern engineering materials and advanced technologies into the industrial praxis. In ICERI 2008 : international conference of education, research and innovation. Editor L. Chova Gómez, D. Belenguer Marti, I. Torres Candel. - Valencia : IATED, 2008. ISBN 978-84-612-5091-2. Názov z CD ROM.
ADAMČÍKOVÁ, Andrea - KOVÁČIK, Jaroslav. Effect of powder size and foaming agent on aluminium foam expansion. In International Doctoral Seminar : proceedings. Editor Alena Sučáková. - Trnava : AlumniPress, 2008, s.3-10. ISBN 978-80-8096-058-2.
KUDLIČKA, Ján. Neistoty pri meraniach. In APLIMAT 2008 : 7-th international conference on applied mathematics. - Bratislava : Slovak University of Technology, 2008. ISBN 978-80-89313-03-7.
GEBURA, Marek - LAPIN, Juraj. Spontaneous rafting in single crystal Ni-base superalloy during long-term ageing. In International Doctoral Seminar : proceedings. Editor Alena Sučáková. - Trnava : AlumniPress, 2008, s.73-79. ISBN 978-80-8096-058-2.
PRODAJOVÁ, Lenka. Intervalová aritmetika. In APLIMAT 2008 : 7-th international conference on applied mathematics. - Bratislava : Slovak University of Technology, 2008. ISBN 978-80-89313-03-7.
OSLANEC, Peter - IŽDINSKÝ, Karol - SIMANČÍK, František. Possibilities of magnesium recycling. In International Doctoral Seminar : proceedings. Editor Alena Sučáková. - Trnava : AlumniPress, 2008, s.200-205. ISBN 978-80-8096-058-2.
STEIN, Juraj. New Development in Application of Electro-Pneumatic Active Vibration Control Systems in Driver's Seats. In Noise and Vibration in Practice : proceedings of the 13th international acoustic conference. Editor Stanislav Žiaran. - Bratislava : STU strojnícka fakulta, 2008, s.95-100. ISBN 978-80-227-2885-0.
ŠEBO, Pavol. Vplyv india na niektoré vlastnosti spájky SnAgCuIn. In Materiál v inžinierskej praxi 2008 : zborník 7.medzinárodnej vedecko-technickej konferencie. Editor Mária Mihaliková, Ján Štaba. - Košice : Hutnícka fakulta TU, 2008, s.35-38. ISBN 978-80-8073-945-4.
WISZT, Erich - WISZTOVÁ, Elena. An approximative solution of some second order differential equation with variable coefficients. In Studies of the University of Žilina, 2007, vol.21, no.1, p.45-52. ISSN 1336-149X.
LAPIN, Juraj - HECHT, Ulrike. Effect of Processing Parameters on Microstructure and Mechanical Properties of Cast TiAl Based Alloys. In METAL 2008 : mezinárodní konference metalurgie a materiálů. - Ostrava : TANGER, 2008. ISBN 978-80-254-1987-8.
GEBURA, Marek - LAPIN, Juraj. Morphological Changes of γ´in Ni-based Superalloy During Long-Term Ageing. In METAL 2008 : mezinárodní konference metalurgie a materiálů. - Ostrava : TANGER, 2008. ISBN 978-80-254-1987-8. Morphological Changes of [gama] in Ni-based Superalloy During Long-Term Ageing.
GABALCOVÁ, Zuzana - LAPIN, Juraj. Microstructure evolution during directional solidification on intermetallic Ti-45.9Al-8Nb alloy. In METAL 2008 : mezinárodní konference metalurgie a materiálů [elektronický zdroj]. - Ostrava : TANGER, 2008. ISBN 978-80-254-1987-8. Názov z CD ROM.
SIMANČÍK, František. PM foams. In Design and Capabilities of PM Components and Materials. vol.1. - Shrewsbury : EPMA, 2008, s.314-350.
BALOG, Martin - KRÍŽIK, Peter - SIMANČÍK, František. Structural damping of heat resistant ultra-fine grained profiles prepared via consolidation of fine Al powders. In MATRIB 2008 : international conference. Editor Krešimir Grilec, Gojko Marić, Suzana Jakovljević. - Zagreb : CSMT, 2008. ISBN 978-953-7040-13-00.
STEIN, Juraj. Active Vibration Control Systems for Driver`s Seats-from Basic research to first Commercial Applications. In Engineering Mechanics 2008 : national conference with international participation. Editor Vladimír Fuis, Pavel Švancara. - Prague : Institute of Thermomechanics, 2008. ISBN 978-80-87012-11-6.
KORÁB, Juraj - DVORÁK, Tomáš - ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan. Metal Matrix Composites for Fusion Reactor Applications. In MATRIB 2008 : international conference. Editor Krešimir Grilec, Gojko Marić, Suzana Jakovljević. - Zagreb : CSMT, 2008. ISBN 978-953-7040-13-00.
ADAMČÍKOVÁ, Andrea - TARABA, Bohumil. Application of the C-test methodology for the validitation of boundary condition for oil quenching process. In Annals of DAAAM for 2008 & proceedings of the 19th international DAAAM Symposium : Intelligent Manufacturing & Automation: Focus on next Generation of Intelligent Systems and Solutions. Editor Branko Katalinic. - Vienna : DAAAM International, 2008. ISBN 978-3-901509-68-1.
NOSKO, Martin - TIJS, Emiel - DE BREE, Hans-Elias. A study of influences of the in situ surface impedance measurement technique. In DAGA 2008 [elektronický zdroj]. Editor Ute Jekosch, Rüdiger Hoffmann. - Berlin : DEGA, 2008. ISBN 978-39808659-4-4. Názov z CD ROM.
NOSKO, Martin - FLOREK, Roman - SIMANČÍK, František - UHRÍK, Roman. Effect of foaming parameters to mechanical properties of Aluminium Foam made by P/M route and its reproducibility. In MATRIB 2008 : international conference. Editor Krešimir Grilec, Gojko Marić, Suzana Jakovljević. - Zagreb : CSMT, 2008. ISBN 978-953-7040-13-00.
FLOREK, Roman - SIMANČÍK, František - NOSKO, Martin - UHRÍK, Roman - MIHÁLKA, Peter. Cooling and heating panels using aluminium foams. In MATRIB 2008 : international conference. Editor Krešimir Grilec, Gojko Marić, Suzana Jakovljević. - Zagreb : CSMT, 2008. ISBN 978-953-7040-13-00.
VIŠNJAKOVA, E.L. - KÚDELA, Stanislav, Jr.. Aljumomatričnyje kompozity s SiC napolnitelem, polučajemym iz drevesnoj stružki. In Kompozicionnyje materialy v promyšlennosti. - Kijev : UIC NTT, 2008.
KOVÁČIK, Jaroslav - BIELEK, J - EMMER, Štefan. Cu-graphite composites: composition dependence of friction coefficient. In Friction, Wear and Wear Protection : international symposium. - Frankfurt : DGM, 2008, s. 12-13.
KOVÁČIK, Jaroslav. Effect of sample size on aluminium foam properties. In EUFOAM 2008. - Noordwijk : ESA/ESTEC, 2008.
EMMER, Štefan - BIELEK, Jozef - KOVÁČIK, Jaroslav. Cu-C Composite Material. In USKOKOVIĆ, Dragan P. YUCOMAT 2008. - Belgrade : ITS SASA, 2008. ISBN 978-86-80321-15-8.
GUALCO, C. - GRATTAROLA, M. - MATALONI, F. - IŽDINSKÝ, Karol - SIMANČÍK, František - SCHWARZ, B. - GARCIA-ROSALES, C. - LÓPEZ-GALILEA, I. Brazing Technology for Plasma Facing Components in Nuclear Fusion Applications Using Low and Graded CTE Interlayers. In New Materials for Extreme Environments : international conference. - Tecnalia : INASMET, 2008. ISBN 978-8495520176.
STEIN, George Juraj. Driver's seat with active pneumatic vibration control: from basic research to first commercial application. In Vehicle System Dynamics, Identification and Anomalies. - Budapest : BUTE, 2008.
IŽDINSKÝ, Karol - DVORÁK, Tomáš - KAVECKÝ, Štefan - ŠTEFÁNIK, Pavol - FRANKOVIČOVÁ, Naďa - KORÁB, Juraj - SIMANČÍK, František. Tungsten wire reinforced copper matrix heat sinks with extremely high thermal stability. In New Materials for Extreme Environments : international conference. - Tecnalia : INASMET, 2008. ISBN 978-8495520176.
IŽDINSKÝ, Karol - FRANKOVIČOVÁ, Naďa - ŠTEFÁNIK, Pavol - DVORÁK, Tomáš - KAVECKÝ, Štefan - KORÁB, Juraj - SIMANČÍK, František. Heat sink materials reinforced with continuous hogh modulus carbon fibres. In New Materials for Extreme Environments : international conference. - Tecnalia : INASMET, 2008. ISBN 978-8495520176.
SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin - TOBOLKA, Peter. Compression test evaluation method for aluminium foam parts of different alloys and densities. In CELLMET 2008. - Dresden : Fraunhofer Institut Fertigungstechnik Materialforschung, 2008.
SIMANČÍK, František - NOSKO, Martin - FLOREK, Roman - TOBOLKA, Peter. Reproducibility of mechanical properties within ALPORAS aluminium foam block. In CELLMET 2008. - Dresden : Fraunhofer Institut Fertigungstechnik Materialforschung, 2008.
VALÚCHOVÁ, Jana - KAVECKÝ, Š. - ČAPLOVIČOVÁ, M. - HEISSLER, S. - JANEK, Marián. Synthesis of multiwall carbon nanotubes catalysed by smectite type of clays. M. Čaplovičová, S. Heissler, Marián Janek. In 4th Mid-European Clay Conference, Poľsko-Zakopané, 2008. - Poľsko-Zakopané, 2008, p. 38.
MIKULA, Marian - GRANČIČ, B. - ROCH, T. - VÁVRA, Ivo - DOBROČKA, Edmund - BURŠÍKOVÁ, Vilma - PLECENÍK, Andrej - KÚŠ, P. Nanocomposite superhard coatings based on titanium and rhenium prepared by D.C. magnetron sputtering. In JVC 12/EVC-10/AMDVG-7. - Budapest : REPS, 2008. Názov z CD ROM.
MATĚJÍČEK, J. - IŽDINSKÝ, Karol - VONDROUŠ, P. Methods of increasing thermal conductivity of plasma sprayed tungsten-based coatings. In New Materials for Extreme Environments : international conference. - Tecnalia : INASMET, 2008. ISBN 978-8495520176.
KÚDELA, Stanislav, Jr. - OSWALD, Steffen - KÚDELA, Stanislav - WETZIG, Klaus. Surface activity of lithium doped alumina fibers. In AOFA 15 : 15.arbeitstagung angewandte oberflächenanalytik. - Soest : University of Applied Sciences, 2008.
WEISSGAERBER, T. - SIMANČÍK, František - WILDNER, H. - BRENDEL, A. Metal matrix composites for thermal management applications. In New Materials for Extreme Environments : international conference. - Tecnalia : INASMET, 2008. ISBN 978-8495520176.
EDMAIER, C. - HULA, R.C. - JANHSEN, T. - KONEGGER, T. - WULZ, H.G. - SIMANČÍK, František. Short and Long Carbon Fiber MMCs Using Pre-Coated Fibers. In New Materials for Extreme Environments : international conference. - Tecnalia : INASMET, 2008. ISBN 978-8495520176.
BALOG, Martin - SIMANČÍK, František. ECAP as the technique for consilidation of rapidly solidified Al based particles. In Deformation and Fracture in Structural PM Materials. - Košice : IMR SAS, 2008.
NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman. Deformation Mechanism of Aluminium Foam Made Via PM Route and Variability in Crash Absorption Ability. In Deformation and Fracture in Structural PM Materials. - Košice : IMR SAS, 2008, s. 59.
JURČI, Peter - DOMÁNKOVÁ, Mária - ŠUŠTARŠIČ, Borivoj - BALOG, Martin. Structure and Properties of PM Al-7Cr Alloy Prepared by Rapid Solidification. In Deformation and Fracture in Structural PM Materials. - Košice : IMR SAS, 2008, s.36.
SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin - TOBOLKA, Peter. Rapid Prototyping for Complex 3-D Parts of PM Aluminium Foams. In Deformation and Fracture in Structural PM Materials. - Košice : IMR SAS, 2008, s.37.
PORUBČAN, Vladimír - KAPIŠINSKÝ, Igor - TÚNYI, Igor - ORLICKÝ, Oto - FUNAKI, Minoru - IŽDINSKÝ, Karol - HROUDA, František - ŠAJGALÍK, Pavol. Differences in magnetic properties between meteorite and tectites. In Contributions to Geophysics and Geodesy : 11th Castle Meeting. Paleo, rock and environmental magnetism, 2008, vol. 38, special issue, p. 99. (2008 - SCOPUS). ISSN 1335-2806. (Castle Meeting : Paleo, Rock and Environmental Magnetism).
SIMANČÍK, František. Nanoštruktúrne kovy s výnimočnými vlastnosťami. In Odhalené tajomstvá chémie. VEDA, Bratislava (2007). - Bratislava : VEDA, 2007, S. 373-391. ISBN 978-80-224-0957-5.
ADAMČÍKOVÁ, Andrea. Penový hliník. In Materials engineer [elektronický zdroj]. - Bratislava : ENTOS, 2008. ISSN 1337-8953.
GEBURA, Marek. Mechanické legovanie z pohľadu fyzikálnej metalurgie. In Materials engineer. ISSN 1337-8953.
GEBURA, Marek. Martenzit. In Materials engineer. ISSN 1337-8953.
GEBURA, Marek. Chemical composition and classification of single crystal nickel base superalloys. In Materials engineer. ISSN 1337-8953.
GEBURA, Marek. Aplikácia metódy konečných prvkov v materiálovom inžinierstve. In Materials engineer. ISSN 1337-8953.
KAVECKÝ, Štefan. Prehľad metód prípravy, vlastností a aplikácií moderných povlakov. In Moderné povlaky. - Bratislava : ÚMMS SAV, 2008. Názov z CD ROM.
LAPIN, Juraj. Žiarupevnosť a žiaruvzdornosť konštrukčných materiálov. In Konštrukčné materiály pre vysokoteplotné aplikácie [elektronický zdroj]. - Bratislava : ÚMMS SAV, 2008. Názov z CD ROM.
LAPIN, Juraj. Niklové, titánové a intermetalické zliatiny. In Konštrukčné materiály pre vysokoteplotné aplikácie [elektronický zdroj]. - Bratislava : ÚMMS SAV, 2008. Názov z CD ROM.
MIKULA, Marian. Moderné tvrdé a supertvrdé vrstvy pripravené PVD metódami. In Moderné povlaky. - Bratislava : ÚMMS SAV, 2008. Názov z CD ROM.
PETRÍK, Peter. Plazmou striekané povlaky. In Moderné povlaky. - Bratislava : ÚMMS SAV, 2008. Názov z CD ROM.
JERZ, Jaroslav. Kovy ovplyvnené nanotechnologickým vývojom. In Rozprávanie o materiáloch a technológiach. - Bratislava : Ústav materiálov a mechaniky strojov, (2008), p. 25-34, s.117-126. ISBN 978-80-970027.
Rozprávanie o materiáloch a technológiách. Editor Jaroslav Jerz. Bratislava : ÚMMS SAV, 2008. 182 s.
JERZ, Jaroslav. Dokonalosť prírodných materiálov. In Rozprávanie o materiáloch a technológiách. - Bratislava : ÚMMS SAV, 2008, s.9-16.
KLIMOVÁ, Alena. Vizuálne vnemy v laboratóriu materiálovej vedy. In Rozprávanie o materiáloch a technológiách. - Bratislava : ÚMMS SAV, 2008.
KOŠÚT, Ján. Únava materiálov - nebezpečná, limitujúca, plná paradoxov. In Rozprávanie o materiáloch a technológiách. - Bratislava : ÚMMS SAV, 2008.
KOVÁČIK, Jaroslav. Materiály a človek. In Rozprávanie o materiáloch a technológiách. - Bratislava : ÚMMS SAV, 2008.